Volumetric Infusion Pump Manufacturers in Punjab
There is a common use of Volumetric infusion pumps in medical facilities. As a noteworthy volumetric infusion pump manufacturers in Punjab, we provide numerous range of devices to the customers. With the top-level of accuracy, we produce prominent and best instruments to the clients.
Widely used
Volumetric Infusion pumps are medical devices efficient to provide the relentless and very specific amount of liquids from slow to very fast rates. In order to deliver quality care to patients, the best and reliable instrument is necessary. We at Nareena life sciences is a well-known Volumetric Infusion pump suppliers in Punjab. Consider us for the best and reliable devices.
Contact us Immediately -
If you are searching for the best V.I Pump, refer us. We assist you with the best line of products in Punjab. Our offered products are available at reasonable prices. For more details, you can check our site gallery and become aware of the device availability.
Nareena's Volumetric Infusion Pump
Basic Features:
- 2.8" TFT-LCD screen.
- Aluminium seamless enclosure
- Embedded handle, Vertical pole mount via bracket.
- Highly accurate infusion rate.
- Anit Bolus system
Technical Features :
| Bolus | 699ml/h |
| Flow rate | 1 mL/h~699 mL/h |
| Volume Limit | 1 mL~9999 mL |
| Accuracy | < ± 5% |
| KVO rate | 1 mL/h |
| Occlusion | 100 kPa~300 kPa |
| Power supply | 100-240V (50/60Hz) |
| Battery type | Rechargeable Li-polymer battery, 7.4V/ 5000 mAh |
| Battery operation time | >4 hours @ 25ml/h |
| Charging time | 8 h~12 h |
| Classification | CF, Class I |
| IP Grade | IPX2 |
| Temperature | +5~+40 °C for operating, -30 °C~+55 °C for storage |
| Humidity | 20~90% for operating, 5~96% for storage |
| Air pressure | 57~106 kPa for operating, 50~106kPa for storage |
| Infusion set | Applicable to GB 8368-2005 disposals; diameters Φ3.5-4.3mm, |
| Alam Functions | Infusion completion,KVO state, Low battery, No power, pressure failure, air bubble, open door, occlusion, infusion remider and motor failure. |
| Display Information | Flow rate,Total volume, accumulated infusion, volume, residual time. |
| Weight | About 1.9 kg |
| Dimension | 143.6mm×151.8mm×195.3mm |
